Image Handler 2 (for ZC v1.3.8 ONLY) Support

[email protected]:

how do I make the image appear larger?
http://hiquatec.com

[email protected]:

http://hiquatec.com

Admin--> Config--> Images

Both the image in the product display page and the pop-up image is the medium sized image.

M

tophand:

Admin--> Config--> Images

Both the image in the product display page and the pop-up image is the medium sized image.

M
heres my images page. I dont see product display or pop-up image
Small Image Width
100

Small Image Height
80

Heading Image Width - Admin
57

Heading Image Height - Admin
40

Subcategory Image Width
100

Subcategory Image Height
57

Calculate Image Size
true

Image Required
true

Image - Shopping Cart Status
1

Image - Shopping Cart Width
50

Image - Shopping Cart Height
40

Category Icon Image Width - Product Info Pages
57

Category Icon Image Height - Product Info Pages
40

Top Subcategory Image Width
150

Top Subcategory Image Height
85

Product Info - Image Width
150

Product Info - Image Height
120

Product Info - Image Medium Suffix
_MED

Product Info - Image Large Suffix
_LRG

Product Info - Number of Additional Images per Row
3

Image - Product Listing Width
100

Image - Product Listing Height
80

Image - Product New Listing Width
100

Image - Product New Listing Height
80

Image - New Products Width
100

Image - New Products Height
80

Image - Featured Products Width
100

Image - Featured Products Height
80

Image - Product All Listing Width
100

Image - Product All Listing Height
80

Product Image - No Image Status
1

Product Image - No Image picture
no_picture.gif

Image - Use Proportional Images on Products and Categories
1

IH resize images
yes

IH small image filetype
no_change

IH small image background
transparent 255:255:255

IH watermark small images
no

IH zoom small images
yes

IH small image hotzone
no

IH small image compression quality
100

IH medium image filetype
no_change

IH medium image background
transparent 255:255:255

IH watermark medium images
no

IH zoom medium images
yes

IH medium image hotzone
no

IH medium image compression quality
100

IH large image filetype
no_change

IH large image background
255:255:255

IH watermark large images
no

IH large image compression quality
100

IH large image maximum width
750

IH large image maximum height
550

IH watermark gravity
Center

IH zoom gravity
SouthEast

[email protected]:

heres my images page. I dont see product display or pop-up image

Product Info - Image Width

Product Info - Image Height

tophand:

Your host could be running a very strict "mod_security" which see Zen-cart as a valid program so it allows unloads but sees IH (hacker) as not a valid program so it flags the image file 600.
This maybe of help.
https://www.zen-cart.com/tutorials/index.php?article=390
Check your .htaccess files too.

M

Have tried putting the following into the htaccess file for both admin and the main directory but still have the same permissions problem:

Spoke to my hosting company and they said "libc6 is responsible for resetting uploaded file permissions to -rw------- . " and that they think Zen-Cart has been updated to work with libc6 and presumably IH2 has not been.

I have no idea what libc6 is apart from something to do with Linux but if anyone has any idea for a workaround I'd love to hear suggestions.

tin_soldier:

Spoke to my hosting company and they said "libc6 is responsible for resetting uploaded file permissions to -rw------- . " and that they think Zen-Cart has been updated to work with libc6 and presumably IH2 has not been.

I have no idea what libc6 is apart from something to do with Linux but if anyone has any idea for a workaround I'd love to hear suggestions.

Might post this in the general question forum.

Can you upload using ftp?

M

believe i have found a problem. i have 1.3.8 running with admin profiles / privliges. after installing image handler it over rides the admin profiles mod.

With admin profile i am ment to be able to deny other admins access to areas and hide the unused buttons. This was working correct. After installing image handler all the buttons now show but still when clicked get the no access warning.

This makes the admin section very cluttered and not how i want it.

did you login using the primary admin and add the privledges. to the user.

I've tried to install image handler several times...gone back over it, making sure I got everything installed but still can't get it to work. My medium images don't want to show up when I have it installed, so I have no product photo on the product page, and the image doesn't pop up on the small images.

Would anyone happen to know what I might be doing wrong? I don't have it installed right now, because of the problem, and am not even for sure I NEED it, just liked that pop up thing, and thought if it helps speed up my site, thats always a good thing too. Any help you may be able to give me would be really appriciated!

doxie:

I've tried to install image handler several times...gone back over it, making sure I got everything installed but still can't get it to work. My medium images don't want to show up when I have it installed, so I have no product photo on the product page, and the image doesn't pop up on the small images.

Would anyone happen to know what I might be doing wrong? I don't have it installed right now, because of the problem, and am not even for sure I NEED it, just liked that pop up thing, and thought if it helps speed up my site, thats always a good thing too. Any help you may be able to give me would be really appriciated!

A link helps us help you.

M

http://www.dapperdoxie.com/shop/

Sorry!! Didn't think you would need it, if image handler isn't turned on, but should have posted it anyway.

doxie:

http://www.dapperdoxie.com/shop/

Sorry!! Didn't think you would need it, if image handler isn't turned on, but should have posted it anyway.

With IH, how are you uploading images and to what folder?
Understand that if you upload images to the Medium or large folder you turn off IH for those images.
When I check your site it seems all you images are located in the large folder.

M

Thats where they are, I didn't know which folder to put them in when I uploaded them, so thats where I put them. I didn't have ih installed when I uploaded the images. I take it I should have huh? LOL Or at least put the images in a different folder? Is it possible to move them, and have them still link up or am I going to have to totally start over on my product, if I want to use IH? I'm so new at this website stuff, I'm still driving blind for the most part. I've been surprised that I've gotten as far as I have. :)

Thanks for your help, and hopefully you have some advice as to how to move them to where ih can use them. LOL

doxie:

Thats where they are, I didn't know which folder to put them in when I uploaded them, so thats where I put them. I didn't have ih installed when I uploaded the images. I take it I should have huh? LOL Or at least put the images in a different folder? Is it possible to move them, and have them still link up or am I going to have to totally start over on my product, if I want to use IH? I'm so new at this website stuff, I'm still driving blind for the most part. I've been surprised that I've gotten as far as I have. :)

Thanks for your help, and hopefully you have some advice as to how to move them to where ih can use them. LOL

If you want to use IH then you need to move or re-upload your images.

http://dapperdoxie.com/shop/images/
```You will need to relink the images if you move them.

If it was me I would use Image Handler Manager.
Admin--> Tools --> Image Handler 2
Select the Category, Select the product, click "Add" or "New".
Default Image File click Browse and select the the image you want (the largest image file you want display, IH will create the small & medium image for you from this file).
Try this on  a couple of products first to see everything goes good.
Repeat.

M

Ohhhhh the light bulb comes on!! Thanks so much! I got it to work on everything except the catagory that has subcatagories. I got the following error on that one.

Error!

Unable to determine the page link!

Function used:

zen_href_link('', '', 'NONSSL')

I don't have time to try to fight that right now, so will have to do it later, but if you have any idea why that may be happening, so I don't have to pull the rest of my hair out, I would sure appriciate it!

Thanks so much for your help, I've been stewing over this for days now, so to finally (mostly) have it working is great!! Maybe I'll be able to move on to the next thing on my list soon. LOL

Bless you!!

shoulders:

How do i apply this patch to the category_product_listing.php?

I do not mean how to use ftp or a text editor but more how do i know where to put the patch text in to the main file. I have searched on this thread and the wiki.

thanks

same question

bluesky2008:

same question

There is no use for the Shopad folder. It is not needed for IH to work.
Not sure why it is even there.

M

have this image handler downloaded http://www.zen-cart.com/index.php?main_page=product_contrib_info&products_id=117 http://www.zen-cart.com/pub/.jbccbogqzphmypylscq/image_handler__for_vx_2-0_for_137.zip)

am sure uploaded all files to the right directories and make the correct image names.

but no additional images shows up on product page.
by the way, it works well on the small zoom and watermark, images are used from the bmz_cache.

all of thoes files of that image handler are correct? or the problem isnt due to those files which should be uploaded? if so, which other file might be wrong?

Well I got up this morning and had to come play with image handler again, I put a couple more images onto a couple more products, which is cool. However when I try to change the image or even add another one to the quick page category I'm still getting the error I got last night, and can't figure out how to get rid of it, or change the image so I have it going through image handler, and so it shows up on the product page. Does anyone have any ideas for me? This is the error I'm getting, when I try to add a image to one of the quick page products...which is a subcategory.

Error!

Unable to determine the page link!

Function used:

zen_href_link('', '', 'NONSSL')

Any help anyone can give me would be appreciated! Thanks!

http://dapperdoxie.com/shop/

doxie:

Well I got up this morning and had to come play with image handler again, I put a couple more images onto a couple more products, which is cool. However when I try to change the image or even add another one to the quick page category I'm still getting the error I got last night, and can't figure out how to get rid of it, or change the image so I have it going through image handler, and so it shows up on the product page. Does anyone have any ideas for me? This is the error I'm getting, when I try to add a image to one of the quick page products...which is a subcategory.

Error!

Unable to determine the page link!

Function used:

zen_href_link('', '', 'NONSSL')

Any help anyone can give me would be appreciated! Thanks!

http://dapperdoxie.com/shop/

Be sure there is No spaces in the file name.

M