Image Handler 2 (for ZC v1.3.8 ONLY) Support

crabdance:

I just checked your site and could not see anything wrong. Did you solve your problem?

Hi There,

Still working on some other issues, so didn't update this yet. My apologies. I tried deleting the IH cache, and that seemed to solve the weird display problem.

As for the errors on my page, I submitted it to the validation site, and have figured out that the erros seem to be caused by the flash mod that i have installed. Though it works, I guess it doesn't follow xhtml markup rules and shows as an error. I will also post this to that other thread.

Thanks for checking! I appreciate it!

Graphicman:

Hi

I dont know what i have done wrong here but i have uploaded all the files and i'm getting this error message

Fatal error: Cannot redeclare class gifinfo in /home/light/public_html/includes/classes/bmz_gif_info.class.php on line **10

**i am desperate to get this site up and running and now can't even load the index page. i have reinstalled the module several times now.

The site in question is www.firstlightgay.co.uk
it is going to be a adult DVD site but there is obviously nothing to see but a white page with the above error.

Can somebody please shed some light on this i could really do with this module and don't want to have to uninstall.

:frusty:

I don't know enough to be able to say what exactly is causing this but I would recommend that you get the latest Image Handler 2 files from the download section and re-install. Make SURE that you overwrite the existing files.

Hope this helps

[QUOTE=bifficus;446831][QUOTE=bifficus;446827]> crabdance:

Thanks for the solution Crabdance... this number five solved the most important of my weird image handler problems too. Although... my site still reports that there is an error on the page. Is it possible to tell where just from that error? QUOTE]

Ok, learned a little more. Check out the weird image hoover problems on the pccapital site (link below). note that the super bus image seems to work fine, but that the others only hoover if the mouse pointer accesses the image from above. If you drag over from below or from either side, they do not work.

How is that for a cool brain teaser!

Any ideas anyone?

Thanks!

PS: How do you like my flash banner? Neat eh? Was fun to do... hope it actually helps.

I just went to your site and it looks like you have things working. It worked as it should for me when I used the mouse to hover over the images. Do you have it working? I did not see any errors. Oh and yes, your flash image looks cool!

webrob:

I have IH2 installed on my 1.3.7 version of ZC.

For some items I add extra images but they end up on other products that I do not want the image to show up on.

Any ideas?

A link?

How are you uploading the extra images?

M

Graphicman:

Hi

I dont know what i have done wrong here but i have uploaded all the files and i'm getting this error message

Fatal error: Cannot redeclare class gifinfo in /home/light/public_html/includes/classes/bmz_gif_info.class.php on line **10

**i am desperate to get this site up and running and now can't even load the index page. i have reinstalled the module several times now.

The site in question is www.firstlightgay.co.uk
it is going to be a adult DVD site but there is obviously nothing to see but a white page with the above error.

Can somebody please shed some light on this i could really do with this module and don't want to have to uninstall.

:frusty:

If you uninstall (you are not deleting any files)
Admin-->Tools--->Image Handler--->Admin--->Uninstall
Does the site come up?

I don't think this has any thing do with IH. A search pointed to a server software issue (Zend). So you might check with your host.

M

100asa:

Strange things!
with bmz_cache to 755 nothing must write; the image on site are incorrect (scaling) but the imagehove is the medium;
1:Able bmz_cache to 777 (with subfolders); the subfolders are populated by cached image; the image on site are right (good image) but imagehover is the the as small image.
(see what I say on 100asa.it)
Why this?
Thanks

If you want images in "New Products" and "Featured Products" to hover then you need to set the image size to match small images set in your configuration.
In your Admin --> Configuration --> Images
To scale right set the width to 110 and height to 0
See image below.

You might want to clear the image cache.
Admin-->Tools---> Image Handler ---> Admin ---> Clear image cache

M

tophand:

If you uninstall (you are not deleting any files)
Admin-->Tools--->Image Handler--->Admin--->Uninstall
Does the site come up?

I don't think this has any thing do with IH. A search pointed to a server software issue (Zend). So you might check with your host.

M

Hi

Thank you everybody for your input,
i have now sorted it :clap:

My problem was as it turns out my error (what a surprise) and i think an initial install problem.
I just reinstalled the whole site and started from scratch and everything is now fine. I think i dropped a file into the wrong folder and was that tired couldn't pick up on it.

I'm just glad that i followed the excellent advice which you always get on the Zen Cart forums and continuously backed my projects up, this allowed me to recover from this situation.

Thanks again:smile:

nickylee:

Hi there,

I'm having a problem with a number of recent Zen Cart installs where the image handler seems unable to correctly calculate image size when accessing the site through it's domain name (i.e http://trumblies.com/), but otherwise is fine when accessing through the servers' path (i.e http://hosting.tradeonlineproject.com/preview/trumblies.com/). It seems to set the height to 0 when accessing through the domain but correctly calculates when not. Can anyone shed any light on this?

• Nick

No-one got any ideas on this? It's driving me (and my clients) nuts.

nickylee:

No-one got any ideas on this? It's driving me (and my clients) nuts.

Check to make sure your configure.php is properly configured for the actual domain name:

includes/configure.php as well as the admin version.

Also, give the Clear Image cache a shot once you've done the above:

Tools :: Image Handler 2

testuser:

Check to make sure your configure.php is properly configured for the actual domain name:

includes/configure.php as well as the admin version.

Also, give the Clear Image cache a shot once you've done the above:

Tools :: Image Handler 2

The configure files are set up correctly but it's spitting out errors when trying to clear the cache.

nickylee:

The configure files are set up correctly but it's spitting out errors when trying to clear the cache.

You double check to see all files for IH are uploaded and in the correct place?
Your using the latest version of IH?

You can try this.
Uninstall IH --->Tools --->Image Handler --> Admin --->Uninstall.
(note, your not deleting any files)
The page will refresh, now clear the image cache.
(If still getting errors you can FTP to the bmz-cache folder and delete all the sub folders).
Again from Image Handler Admin, you can install IH.

M

tophand:

You double check to see all files for IH are uploaded and in the correct place?
Your using the latest version of IH?

You can try this.
Uninstall IH --->Tools --->Image Handler --> Admin --->Uninstall.
(note, your not deleting any files)
The page will refresh, now clear the image cache.
(If still getting errors you can FTP to the bmz-cache folder and delete all the sub folders).
Again from Image Handler Admin, you can install IH.

M

I've tried all of this already too. You can see why I'm totally stumped... :dontgetit
Especially since it's working fine through the direct server path. Weirdly I've also noticed that it's using the defined settings for "Small Image" everywhere and ignoring the other section specific settings such as "Product Info Image" etc., but ONLY when accessing via the domain name.

Aha! The crisis is over, it turned out that Safe Mode had been accidentally turned on for the affected sites despite our installation template being setup to switch it off.

Thanks for your help though. :smile:

I have installed this mod on 4 sites so far and can get the zoom working on this site: http://thebestofgifts.com The images show up in admin but no zoom...any ideas? Thanks! Amy

Doodlebuckets:

I have installed this mod on 4 sites so far and can get the zoom working on this site: http://thebestofgifts.com The images show up in admin but no zoom...any ideas? Thanks! Amy

Hi Amy,
The only thing I know to tell you is to reinstall your IH2 files again. Make sure you overwrite ALL files (check your ftp software). Use the javascript fix for the image_hover.js file. Make sure your files are in the right place. I could not get it to work when the .js files were installed in the template_default/jscript directory. I had to use my_template/jscript directory.

Don't know if this will help you or if you already have tried it but I hope this will help.

crabdance:

Hi Amy,
The only thing I know to tell you is to reinstall your IH2 files again. Make sure you overwrite ALL files (check your ftp software). Use the javascript fix for the image_hover.js file. Make sure your files are in the right place. I could not get it to work when the .js files were installed in the template_default/jscript directory. I had to use my_template/jscript directory.

Don't know if this will help you or if you already have tried it but I hope this will help.

That's it!!! I had forgotten that was something I had to do before. I appreciate the reminder...So did you get it working in IE?

Amy

Doodlebuckets:

That's it!!! I had forgotten that was something I had to do before. I appreciate the reminder...So did you get it working in IE?

Amy

Glad you got it working! And yes, I did get it to work for IE. I think that the way I got it to work was with the IE6 javascript fix. Is it working in IE for you?

Happy it's doing better for you...

crabdance:

Glad you got it working! And yes, I did get it to work for IE. I think that the way I got it to work was with the IE6 javascript fix. Is it working in IE for you?

Happy it's doing better for you...

It does work with on exception. All the images zoom in Firefox and most zoom in IE, except for the "New Products". The top row zooms but not the 2nd and 3rd rows. In the product categories, the same pics zoom. http://thebestofgifts.com

Odd, no?

Doodlebuckets:

It does work with on exception. All the images zoom in Firefox and most zoom in IE, except for the "New Products". The top row zooms but not the 2nd and 3rd rows. In the product categories, the same pics zoom. http://thebestofgifts.com

Odd, no?

There is a IE bug in the jscrpt_imagehover.js.
The hover works, it just coming up outside the screen.
A few posts back I posted a link for the fix.
You can edit the jscrpt_imagehover.js file yourself or there is a patched file you can use.
You can search this thread for "IE Bug" also.

M

Hello pro Zenners,

I have tried to search far and wide for the answer to this but please bear with me if it's already been discussed...

I have ZC 1.37 and IH2 up and working great. The problem is when I add new products via duplication.

Most of my products are similar, only the photos and description change a little from each one to the other, so to add a new product I choose duplicate, duplicate to same category, and keep attributes.

That gives me a new product where I can edit the description, etc. But at first I tried to go in and 'delete' the images for that product (new one) with IH then add new images. What I realized is that deleted the images from the PREVIOUS product that it was copied from.

So, I think, the right way to go about it if I want to copy this way is not to delete the images on the new product but instead go in and choose the first one, hit 'edit', upload that pic, choose the 2nd, 'edit' , upload, etc.

Is this right? Am I missing a trick that everyone else uses?!?!?

Thanks!
Patrick